Polar RS300X Heart Rate Monitor

The Polar RS300X is designed for recreational athletes who require all essential heart rate and timing features. The Polar RS300X helps you train with personal sport zones and also displays calories burned. Offered in 3 different versions - RS300X, RS300X G1 (includes the Polar G1 GPS Sensor), and the RS300X SD (includes the Polar S1 Foot Pod Sensor to measure speed and distance).

Body measurement features

• Automatic age-based target zone – bpm / %

  To help you train safely and effectively, the training computer automatically determines your heart rate target zone limits according to your age-based maximum heart rate (220 minus age). The limits are determined either in beats per minute (bpm) or as a percentage (%) of your maximum heart rate. See also Manual target zone.
• Average and maximum heart rate of each lap
• Average and maximum heart rate of training

• Heart rate – bpm / %

  Heart rate is the measurement of the work your heart does. Heart rate can be expressed as the number of beats per minute (bpm) or as a percentage (%) of your maximum heart rate.

• HR-based target zones with visual and audible alarm

  You can define your target zones for a training session based on heart rate to help define the right intensity. When you are out of the preset zones, the training computer will give a visual and audible alarm.

• HRmax (age-based)

  The highest number of heart beats per minute (bpm) during maximum physical exertion. For a rough estimate of your maximum heart rate, subtract your age from 220. HRmax is a useful tool for determining the intensity of training as intensity zones can be defined using HRmax. Some Polar products define maximum heart rate during the Polar Fitness Test, see also HRmax (Polar Fitness Test -based).
• HRmax (user set)

• Manual target zone – bpm / %

  This feature enables you to manually enter the target zone that is suitable for your training. You can set the target zone for your training as beats per minute (bpm) or as a percentage of your maximum heart rate.

• Polar Fitness Test

  Polar Fitness Test measures your aerobic fitness at rest in just five minutes. The result, Polar OwnIndex, evaluates your maximal oxygen uptake (VO2max). With the Polar Fitness Test you can measure your aerobic fitness by yourself, automatically and without any exertion. All you need is your training computer. The Polar Fitness Test is as accurate in predicting the VO2max as any sub maximal fitness test. The test is based on heart rate and heart rate variability at rest and personal information.

• Polar OwnCal® – calorie expenditure

  Polar OwnCal calculates the number of calories burned during training. This feature allows you to track the calories burned during one training session and cumulative calories burned during several training sessions.

• Polar OwnCode® (5kHz) – coded transmission

  Coded heart rate transmission automatically locks in a code to transmit your heart rate to the training computer. The training computer picks up your heart rate from your transmitter only. Coding prevents interference from other training computers.

• Polar OwnZone® – personal heart rate zone

  Polar OwnZone® determines your personal heart rate limits for a training session. Depending on the day and time, your physical state may vary, for instance, if you are stressed or tired, or if you are not fully recovered from your latest training session, Polar can determine that information from your heart rate and guide you to your ideal training zone for that moment.

• Polar sport zones

  Polar sport zones provide an easy way to select and monitor the intensity of your training and to follow sport zones based training programs. Training is divided into five zones based on percentages of your maximum heart rate: very light (50-60%HRmax), light (60-70%HRmax), moderate (70-80%HRmax), hard (80-90%HRmax) and maximum (90-100%HRmax).

• Training load – available via polarpersonaltrainer.com

  This feature is available in Polar software. When you transfer training results from your training computer to polarpersonaltrainer.com, you can follow your training load and recovery in the training diary. Continuous monitoring of training load and recovery will help you recognize personal limits, avoid over- or undertraining, and adjust training intensity and duration according to your daily and weekly targets

Data transfer

• Compatible with Mac (Intel-based) via Polar FlowLink
• Compatible with PC via Polar FlowLink
• Compatible with polarpersonaltrainer.com via Polar FlowLink

G1 GPS sensor features - OPTIONAL

• Distance – training, lap, and total

  Distance (km, mi) can be set and measured in several ways. Training distance tells you the distance traveled during a training session. Lap distance tells you the distance of one lap. Total distance is the distance accumulated since the last reset.

• Speed-based target zones with visual and audible alarm

  You can define your target zones for a training session based on speed. When you are out of the preset zones, the training computer will give a visual and audible alarm.

• Speed/Pace – current, average and maximum

  Speed (km/h or mi/h) is measured with GPS, footpod, stride sensor or cycling speed sensor. Pace (expressed as min/km or min/mile) stands for the rate of speed. Pace is usually used in running. By setting a target pace, you can follow how fast you need to run in order to reach a certain distance in a predefined time.

Polarpersonaltrainer.com features

• Training analyzing
• Training Diary
• Training Load
• Training programs

Polarpersonaltrainer.com features

Recording features

• Totals

  Totals includes your training data starting from the last reset enabling you to follow your long-term training.
• Training files (with summaries) – 16

• Weekly history

  Weekly history gathers your weekly training data. By selecting a week, you can review your training data for the week.

S1 footpod features - OPTIONAL

• Distance – training, lap, and total

  Distance (km, mi) can be set and measured in several ways. Training distance tells you the distance traveled during a training session. Lap distance tells you the distance of one lap. Total distance is the distance accumulated since the last reset.

• Speed/Pace – current, average and maximum

  Speed (km/h or mi/h) is measured with GPS, footpod, stride sensor or cycling speed sensor. Pace (expressed as min/km or min/mile) stands for the rate of speed. Pace is usually used in running. By setting a target pace, you can follow how fast you need to run in order to reach a certain distance in a predefined time.

• Speed/Pace-based target zones with visual and audible alarm

  You can define your target zones for a training session based on speed. When you are out of the preset zones, the training computer will give a visual and audible alarm.

Training features

• Automatic lap recording

  With this feature you can set your training computer to take laps based on preset distance, for example, every 1 km/mi.

• Display zoom

  Display zoom feature allows you to zoom in information on the display during training.

• Graphical target zone indicator

  This feature points out graphically on the display the zone you are in during a training session helping you to stay on the desired intensity zone.

• HeartTouch – button-free operation of wrist unit

  When HeartTouch is on, different training information during training can be accessed without pressing buttons, for instance, when gloves make pressing buttons difficult, by bringing your training computer close to your transmitter.

• Interval trainer guided workouts – heart rate / pace / distance

  Create interval guided workouts based on time, heart rate, speed/pace or distance guidance with up to three linked timers or distances and up to three target zones.
• Number of laps – 99

• Time and distance based interval timers

  Use timers, for example, as a training tool in interval training to tell you when to switch from a harder to a lighter period and vice versa. The timers can be time- or distance- based.

• User configurable displays – two lines

  This feature allows you to configure training computer displays to show the information that you need during your training session. Configure the displays either in the training computer or in ProTrainer 5 software.

• ZoneLock

  ZoneLock feature helps you to accumulate certain intensity. You can either lock a zone before a training session or during it by pressing a button when you are on the desired zone.

• ZonePointer

  ZonePointer is a visible and moving symbol on the training computer display indicating whether you are inside the pre-set target zone. This feature helps you to reach the desired intensity/pace/speed/cadence targets.

Watch features

• Backlight
• Date and weekday indicator
• Display text in English, German, French, and Spanish

• KeyLock

  By activating KeyLock, training computer buttons are locked, and accidental presses do not cause problems, for instance, during training.
• Time of day (12/24h) with alarm and snooze
• Water resistant – 50m